What capacity is specified for this compactor?
11 m³. Confirm the completed tank or body drawing and rated load for the final build.
GARBAGE COMPACTOR TRUCKS
JAC 11 m³ Rear-Loader Garbage Compactor Truck
A medium JAC compactor for container-based waste pickup.
This JAC configuration can collect at sites that present bins to a rear lifter. Confirm the bin interface and lifting geometry, then plan the return trip to the disposal facility.
PRODUCT POSITIONING
An 11 m³ JAC compactor for container-based municipal collection. The source specifies a rear loader and a compression ratio range; these guide route planning, while actual waste mass per trip depends on the waste stream and completed vehicle rating. The hopper and lifting mechanism require a matching container.
VEHICLE DATA
Specifications
- Manufacturer
- Chengli (CLW)
- Chassis
- JAC
- Drive layout
- 4×2
- Fuel type
- Diesel
- Engine power
- 132 kW
- Wheelbase
- 3845 mm
- Primary capacity
- 11 m³
WHAT IT DOES
Core capabilities
- Rear loading enables collection from a compatible bin or hopper
- 11 m³ refuse body for planned collection rounds
WORKING FIT
Applications and operating fit
Municipal solid-waste collection
Collection and compaction of compatible municipal refuse on accessible routes.
Suitable conditions
- Accessible collection points with a suitable bin or hopper interface
- Receiving sites that accept rear-discharge vehicles
Conditions to review
- Hazardous waste without a dedicated approved vehicle
- Routes where the completed truck cannot access bins or the receiving site
VEHICLE DATA
Body details
- Compression ratio
- 1:2.5 to 1:3.0
- Refuse body
- 11 m³
VEHICLE DATA
Working system
- Working arrangement
- Rear loading with hydraulic compaction and bin lifting
PROJECT NOTES
Body volume does not establish the permitted waste mass. Confirm the completed vehicle rating.
BEFORE ENQUIRY
Information for a quotation
Information to provide
- Waste stream and daily route
- Bin sizes and lifting arrangement
- Destination country and driving side
- Required load and quantity
Items to confirm
- Confirm body drawing, bin interface and discharge arrangement
- Confirm final GVW, axle ratings and payload
- Confirm destination documentation
PRODUCT QUESTIONS
Frequently asked questions
Which feature distinguishes this JAC configuration?
Compression ratio 1:2.5 to 1:3.0. Confirm the selected build and equipment before ordering.
What drive layout is specified?
The vehicle has a 4×2 drive layout. Check route access, turning space and the selected chassis before ordering.
ENQUIRIES
Discuss this vehicle
Send the destination country, quantity and required configuration so we can review the build with you.